Area Rugs and Runners Cut and Bound in Our Commack Shop
Area rugs and runners are a quiet little craft, and we have been doing it off Jericho Turnpike for a long time. All Carpet Inc. stocks pre-made area rugs and runners in rectangular, round, and square sizes, and if the piece in your head is not on the shelf, we cut and bind one from the same carpet rolls that build out the bedrooms upstairs. Any in-stock carpet becomes a rug or a runner. Call (631) 493-9496 or stop by 6183 Jericho Turnpike to see the samples.
Area rugs look their best on hard surfaces. Lay one over natural or engineered hardwood or luxury vinyl plank to warm the room and soften the acoustics. For a tile landing or kitchen edge, a runner catches the morning traffic that would otherwise wear a path.
What Goes Into a Custom Rug or Runner
- Pre-made area rugs in rectangular, round, and square
- Custom area rugs cut from in-stock carpet
- Standard 27 inch and 32 inch hallway runners
- Custom runners for landings, odd halls, and L-shapes
- Carpet runners for stairs with matched tread wraps
- Custom carpet binding, serging, and edge finishing
- Non-slip pad sized to the finished piece
- Same-day pickup, next-day delivery across Suffolk
The shop keeps roughly 60 runner rolls on the shelf, with full broadloom rolls behind them for custom cuts. Custom area rugs start with a piece of carpet picked off the floor, a measurement, and a choice of edge. Custom carpet binding is the most common finish, but we also serge and tape depending on how dressy you want the edge to read.
Rooms and Stairs Where Area Rugs and Runners Earn Their Keep
Stairs that run bare wood today
The number one call. Oak treads look great until the kids and the dog turn them into a sprint. Carpet runners for stairs quiet the whole stack, protect the nosings, and give a safer footing in socks. We cut the runner, wrap each tread, and tack the risers so the pattern lines up top to bottom.
Long hallways and second-floor landings
Hallway runners are what pull a second floor together. A 32 inch runner down a Smithtown colonial hallway hides the traffic lane in the hardwood and lets the bedroom doors read as part of one room. We make the runner the full length of the hall and square off the ends with a bound edge rather than a factory selvage.
Living rooms, dining rooms, and under beds
Custom area rugs are the fix when a standard 8 by 10 does not work for your room. The living room is 9 feet wide. The dining table needs 24 inches of chair pull on every side. The master wants a 3 foot border of carpet past the mattress. We cut to the number that works and bind to the look that fits.
How Our Commack Shop Measures, Cuts, and Binds
- Calls and messages answered within one hour
- Free in-home measure and written estimate the same day
- In-house crew, no subcontracted labor on your stairs
- Ralph, the owner, on every custom cut before it leaves
Every custom piece starts with a measurement. For stairs, we count treads, measure the nosing style, and note any winders at the landing. For a room rug, we tape the finished rectangle on the floor so the proportion is right before we cut carpet. The binding machine takes the piece next, and we pick a tape or serge color that disappears into the pile. Pad is cut last, a half inch smaller than the finished rug on every side so it never shows.
We are fully insured on every residential job and happy to deliver and lay the finished piece in Commack and the neighboring towns. Ralph, the owner, inspects every custom cut before it leaves the shop.
From First Visit to Rug on the Floor
Here is how a standard custom rug or runner job runs with us, from the first phone call to the finished piece on the floor.
- 01
Visit the showroom or book a measure
Walk into the Commack showroom with your dimensions, or reach us through the contact page and we come measure for free. You pick the carpet off the floor, we price the cut, and you get a written number before you leave.
- 02
Cut, bind, and pad
The piece gets cut to size, run through the edge machine for custom carpet binding or serging, and matched with a non-slip pad trimmed a half inch smaller on every side. Browse photos of our recent work while the shop finishes yours.
- 03
Delivery or stair install
Area rugs ride home in the car or go out on the delivery truck. Stair runners get installed by our crew the same way we lay carpet in the bedrooms, with every tread wrapped tight and the pattern aligned top to bottom.
Area Rugs and Runners Delivered Across Suffolk County
Free in-home measures and finished-piece delivery go out to Commack, Smithtown, Dix Hills, Northport, St. James, Fort Salonga, Melville, and Kings Park. If you have been searching for an area rug store near me from a kitchen off Jericho Turnpike, Route 25A, or the Sagtikos, we are usually ten minutes up the road. A quick visit to the showroom beats guessing from a phone screen, and the search for an area rug store near me ends in a cup of coffee on our showroom floor.
If you came for a rug and found a room, we also cut and install wall-to-wall carpet, vinyl composition tile, and the free in-home shopping service that brings samples to your front door. Read what our customers have said about the finished work.
Rug and Runner Questions From Long Island Homeowners
How long does a custom area rug take once I pick the carpet?
Most custom area rugs are out the door in three to five business days. The cut itself is same day. The custom carpet binding or serged edge is what sets the clock, since the edge machine runs one piece at a time and we size the backing and pad to match the finished dimensions before it ships.
Can you make carpet runners for stairs that match a runner in the hallway?
Yes, and that is the most common runner call we get in Commack. We cut the stair treads and the hallway runners from the same roll so the pattern lines up at the landing. Rounded nosings get a tucked wrap, box nosings get stapled under the lip, and the edge binding is picked to disappear against the carpet.
Do you bind a rug I bought somewhere else?
Yes. Bring the piece into 6183 Jericho Turnpike and we will quote custom carpet binding on the spot. Cotton tape, synthetic tape, and serged edges are all on the shelf. If the backing is already fraying, we may trim an inch off each side before binding so the finished edge holds up.
How do I keep a runner from sliding on hardwood or LVP?
A proper non-slip pad, cut a half inch smaller than the runner on every side. We size pads to the finished piece before it leaves the shop. On wider halls, two narrow pads work better than one wide one because they let the runner breathe at the seams.
What sizes do your hallway runners come in and can you make them longer?
We stock about 60 runner rolls in the standard 27 inch and 32 inch widths, with lengths cut to the foot. For longer halls or front-to-back runs through Dix Hills colonials and Northport ranches, we join pieces at a hidden seam under a doorway and bind the ends to match.
Call for Your Free Estimate for Area Rugs and Runners
At All Carpet & Flooring, our goal is to make your floor-buying experience as easy and pain-free as possible. Family owned and operated, we are a 2nd generation company and have proudly been providing Long Island with outstanding service and superior work since 1969. Our owner is on-site for every job. Count on us for all your commercial and residential needs. From carpets, area rugs and runners to linoleum, hardwood, tile and more, we've got you covered. In-stock Inventory, buy today, install tomorrow!